mpuprojectblog.wordpress.com
Making PCBs | MPU Project Blog
https://mpuprojectblog.wordpress.com/2013/08/10/making-pcbs
Because I need to document it somehow :). Skip to primary content. August 10, 2013. There is a first time for everything and this time it’s about drawing a PCB and using a board house to manufacture it. I drew a even smaller breakout board for the MPU-6050 with Eagle. And sent the files to Seeedstudio’s. Because Seeedstudio had downloadable design rules and a gerber generator. A couple of great tutorials have also helped me: Jeremy Blum. 8216;s Eagle tutorials on youtube. EDIT: Sparkfun also posted this.
mpuprojectblog.wordpress.com
snoegnud | MPU Project Blog
https://mpuprojectblog.wordpress.com/author/snoegnud
Because I need to document it somehow :). Skip to primary content. Skip to secondary content. Looking at wires and ways to attach the sensors. September 7, 2013. The wires of the glove are currently pieces of ribbon cable separated from an old “ IDE-cable. Thick flat flex cable. Parallel ATA / UDMA cable. Thin (6-lead) flat flex cable. The 2 headphones I bought turned out to have very thin solid core wires. So, although very nice otherwise, I’m afraid of them eventually breaking. They are d...Conductive ...