bitsintoatoms.wordpress.com
Bits Into Atoms | Page 2
https://bitsintoatoms.wordpress.com/page/2
June 12, 2013. I’ve created printable mount for the Rostock Max EZStruder. It includes a little minimal spool holder that lays the spool on it’s side and a mount for the extruder. The spool holder works nicely by itself. It’s easy to add and remove rolls, it’ll fit small spindle holes (like on Taulman Nylon), turns very easily and you can fit three of them on the top of the Rostock Max. You can get a copy of it from Thingiverse. Posted in Rostock Max Mods. Newer posts ›. 3D Printed Soprano Ukulele.
bitsintoatoms.wordpress.com
Converting my Filastruder to Vertical | Bits Into Atoms
https://bitsintoatoms.wordpress.com/2013/07/05/converting-my-filastruder-to-vertical
Converting my Filastruder to Vertical. Converting my Filastruder to Vertical. July 5, 2013. On Thingiverse, I gave it a try by just turning my Filastruder on it’s end. After running it for a few minutes, it was an obviously better way to extrude filament. I decided to switch to a vertical Filastruder but there was no way I was going to take the pipe apart for a 3rd (4th? Vertical is definitely the way to go. The filament comes out perfectly as long as you don’t touch it at any point from the no...2 comme...
bitsintoatoms.wordpress.com
Mixing Masterbatch for the Filastruder | Bits Into Atoms
https://bitsintoatoms.wordpress.com/2013/07/05/mixing-masterbatch-for-the-filastruder
Mixing Masterbatch for the Filastruder. Mixing Masterbatch for the Filastruder. July 5, 2013. For my first custom color filament on the Filastruder, I decided to do a key lime. This was mainly because I had some color shifting key-lime pie pigment left over from another project that I wanted to try. I’d also ordered a bunch of masterbatch pigments from OSPrinting. Here is the formula I used:. ABS Natural (2 cups). ABS masterbatch @ 32:1. 85% Yellow (2.5 teaspoon). 15% Blue (0.5 teaspoon). Mixing Masterba...
bitsintoatoms.wordpress.com
Updated Magnetic Effector | Bits Into Atoms
https://bitsintoatoms.wordpress.com/2013/07/02/updated-magnetic-effector
July 2, 2013. Here is an update to the magnetic effector. I’ve tilted the fans and created some tunnels that direct the output of the three fans right at center of spot being printed. It still has room on the bottom for 3 strips of 6 LEDs. I started off with white ABS and then switched to black at about 2mm. Then near the end I decided to switch again for printing the fan tubes. I currently only have three colors in ABS so I switched to green. 8249; Filastruder filament maker for 3D Printers. Masterbatch...
bitsintoatoms.wordpress.com
Converting my Filastruder to Vertical | Bits Into Atoms
https://bitsintoatoms.wordpress.com/2013/07/05/converting-my-filastruder-to-vertical/comment-page-1
Converting my Filastruder to Vertical. Converting my Filastruder to Vertical. July 5, 2013. On Thingiverse, I gave it a try by just turning my Filastruder on it’s end. After running it for a few minutes, it was an obviously better way to extrude filament. I decided to switch to a vertical Filastruder but there was no way I was going to take the pipe apart for a 3rd (4th? Vertical is definitely the way to go. The filament comes out perfectly as long as you don’t touch it at any point from the no...2 comme...
bitsintoatoms.wordpress.com
December | 2013 | Bits Into Atoms
https://bitsintoatoms.wordpress.com/2013/12
Monthly Archives: December 2013. 3D Printed Soprano Ukulele. December 11, 2013. I decided to create a design for a headless soprano ukulele. I broke the design into three main pieces; the neck, the body and a piece to help stabilize the connection between the neck and body. I’d really like it …. Read more ›. Posted in Printed Objects. 3D Printed Soprano Ukulele. Masterbatch Ratios for the Filastruder. Converting my Filastruder to Vertical. Mixing Masterbatch for the Filastruder. 2016 Bits Into Atoms.
bitsintoatoms.wordpress.com
David Smith | Bits Into Atoms
https://bitsintoatoms.wordpress.com/author/bitsintoatoms
View all posts by David Smith. 3D Printed Soprano Ukulele. December 11, 2013. I decided to create a design for a headless soprano ukulele. I broke the design into three main pieces; the neck, the body and a piece to help stabilize the connection between the neck and body. I’d really like it …. Read more ›. Posted in Printed Objects. Masterbatch Ratios for the Filastruder. August 6, 2013. Read more ›. Converting my Filastruder to Vertical. July 5, 2013. Read more ›. Mixing Masterbatch for the Filastruder.
bitsintoatoms.wordpress.com
Filastruder filament maker for 3D Printers | Bits Into Atoms
https://bitsintoatoms.wordpress.com/2013/07/02/filastruder-filament-maker-for-3d-printers
Filastruder filament maker for 3D Printers. Filastruder filament maker for 3D Printers. July 2, 2013. I received the Filastruder. Kit after backing it on Kickstarter. It didn’t take too long to put it together. I had preprinted all the plastic parts it needed so all the mechanics, including cutting a couple pieces of wood and painting them took about an hour and a half. The electronics took about another 45 minutes. I also added some aluminum fins to help cool down the pipe. I cranked it up and after abo...