mitresled.robhoppe.com
Mitre Sled
Click thumbnail images below for larger, more detailed views. One piece of Melamine covered particleboard shelving " x 18" x 22" (approximate). One 3’ length of 2"x2" oak stock (straight as possible). Two 1/4"-20 carriage bolts w/ washers and wing nuts to fit OR Rockler. Item #23804 or #71506. 18" metal machinist rule preferably with 1/64" graduations ( for accuracy). X 4" x 2" hardwood scrap block. 3/8"brass insert with 1/4"-20 hex bolt to fit about 2" long and a 1/4"-20 nut to fit bolt. Use a piece of ...
woodensphere.robhoppe.com
Turning Wood Spheres
My first shot at turning a Sphere on the Lathe was time consuming but it all turned out well in the end, just a matter of checking and rechecking everything and doing it often! I spent a lot of time drawing everything out before putting tool to wood, I hope this all helps. Wood Lathe (multi-speed helps and at least a 5" radius bed.). 6" Steel Rule or other perfect straight edge. Manila Folder or Heavy Paper. Thumbnails loading, be patient. Click thumbnails for detailed views. It is turned on 2 axis only.
video.robhoppe.com
Hoppe Family Videos
April 11, 2009:. Tia puts on a little concert. Just under 9 minutes worth. Got 9 minutes? February 23-27, 2009:. O'ahu Hawai'i. PART I. A little time spent on the island. Video, photos and local music! February 23-27, 2009:. O'ahu Hawai'i. PART II. The continuation of Part I since YouTube does not allow long videos. :). February 18, 2009:. Fort Drum, NY (again) A little fun with the Common Driver Trainer / MRAP Variant (CDT/MV). January 29, 2009:. Fort Drum, NY Investigating Common Driver Trainer Site.