arduskipper.blogspot.com
ArduSkipper: Ardino Ammeter
http://arduskipper.blogspot.com/2011/12/ardino-ammeter.html
Using Arduino to collect, transmit, and display sailboat instrument data. Sunday, December 4, 2011. I'm on a little tangent from the original arduskipper project. Senario: When you are sailing a real sailboat and you are the skipper you have a hand on the tiller. With that feel you can tell how much resistance the rudder producing as the boat moves through the water. To keep the boat on course sometimes you feel a considerable resistance as you push the tiller to one side. GPS / Sensor Logging.
oppedijk.com
Oppedijk.com - Calibration
http://www.oppedijk.com/sailing/calibration
Klik aan Klik uit. Boeien importeren in WinGPS. Some documents about sailing speed and calibration. Merlins blog about a custom system, calibration, leeway and heel. Http:/ sailboatinstruments.blogspot.com/. Info over B&G calibratie. Http:/ forums.sailinganarchy.com/index.php? Http:/ www.bandg.com/upload/BandG/Documents/Div/ffdquickreferenceguide.pdf. An article about VMC. Http:/ wcsailing.blogspot.com/2008/10/vmg-vs-vmc-buoy-racing.html. And more documents below.
arduskipper.blogspot.com
ArduSkipper: NewSoftSerial, Attachinterupt() and Pins 2,3
http://arduskipper.blogspot.com/2011/07/newsoftserial-attachinterupt-and-pins.html
Using Arduino to collect, transmit, and display sailboat instrument data. Sunday, July 10, 2011. NewSoftSerial, Attachinterupt() and Pins 2,3. It's code time. I've been cutting and pasting code together trying to get everything to work at the same time. I'm using a em-406a. GPS on the Adafruit GPS shield. I have 2 photogates that need to use the attachinterupt(). So I tried moving the GPS to other pins, 8 and 9 worked. Now pins 2 and 3 are free for my photogates. Subscribe to: Post Comments (Atom).
arduskipper.blogspot.com
ArduSkipper: Instrument Data Receiver and Display
http://arduskipper.blogspot.com/2011/07/instrument-data-receiver-and-display.html
Using Arduino to collect, transmit, and display sailboat instrument data. Sunday, July 17, 2011. Instrument Data Receiver and Display. This was a lot easier than I had imagined. I followed the Ladyada LCD tutorial. And her xBee tutorial. And an adafruit xBee adapter. The computer just has terminal running using this tutorial. If you want to connect to your xBee using a terminal on a Mac here's how. The second xBee is pictured to the right. Subscribe to: Post Comments (Atom). GPS / Sensor Logging.
arduskipper.blogspot.com
ArduSkipper: July 2011
http://arduskipper.blogspot.com/2011_07_01_archive.html
Using Arduino to collect, transmit, and display sailboat instrument data. Sunday, July 17, 2011. Instrument Data Receiver and Display. This was a lot easier than I had imagined. I followed the Ladyada LCD tutorial. And her xBee tutorial. And an adafruit xBee adapter. The computer just has terminal running using this tutorial. If you want to connect to your xBee using a terminal on a Mac here's how. The second xBee is pictured to the right. Sunday, July 10, 2011. GPS on the Adafruit GPS shield. Paddle Whe...
oppedijk.com
Oppedijk.com - B and G
http://www.oppedijk.com/bandg
Klik aan Klik uit. Boeien importeren in WinGPS. Page about all the Brookes and Gatehouse (B and G) marine electronics system. Schemas and circuits of the H2000. Info on the H3000. Detailed info on the Fastnet. Bus used by B&G, to send custom data to your (20/20) displays. Change the bearings on your 213 Type Masthead Unit (213 MHU), add a clinometer or a temperature meter, have a look at the sensor. Neem contact met me op om B&G problemen op te lossen, mail naar bandg@oppedijk.com. For sale / te koop.
arduskipper.blogspot.com
ArduSkipper: Rudder Feedback Servo
http://arduskipper.blogspot.com/2011/12/rudder-feedback-servo.html
Using Arduino to collect, transmit, and display sailboat instrument data. Sunday, December 4, 2011. The rudder current draw information is sent back to the hand held transmitter and the pictured servo responds accordingly. If you look closely at this picture you see that the servo glued to the stick mechanism had a small spring at attached at the end of the servo arm. May 23, 2012 at 10:48 PM. Nice project, Im doing a quite similar project. need to have a talk with you. H. December 6, 2015 at 7:22 PM.
arduskipper.blogspot.com
ArduSkipper: December 2011
http://arduskipper.blogspot.com/2011_12_01_archive.html
Using Arduino to collect, transmit, and display sailboat instrument data. Sunday, December 4, 2011. The rudder current draw information is sent back to the hand held transmitter and the pictured servo responds accordingly. If you look closely at this picture you see that the servo glued to the stick mechanism had a small spring at attached at the end of the servo arm. I'm on a little tangent from the original arduskipper project. So, what you see in the picture is a resistor in parallel with the servo po...
arduskipper.blogspot.com
ArduSkipper: Paddle Wheel on the Stern
http://arduskipper.blogspot.com/2011/07/paddle-wheel-on-stern.html
Using Arduino to collect, transmit, and display sailboat instrument data. Wednesday, July 6, 2011. Paddle Wheel on the Stern. I have the photo interrupter all wired up. With the paddlewheel in place and painted black it works really well. right now all I get is RPMs. But I'll calibrate it with the GPS soon. Subscribe to: Post Comments (Atom). GPS / Sensor Logging. Measure Heading to calculate leeway angle. Wind Vane Damping (smoothing). GPS Data Logger Adafruit. Autonomous Depth Sounding Boat.