wincnctech.blogspot.com
WinCNC Technicians Log: How can I make Wincnc wait for an Auxin Input Channel to come on?
http://wincnctech.blogspot.com/2006/03/how-can-i-make-wincnc-wait-for-auxin.html
Wednesday, March 08, 2006. How can I make Wincnc wait for an Auxin Input Channel to come on? When used in a gcode file, the M17 command will wait until an input comes on before it processes the next line of code. If the input channel is already turned on, the program will continue running. Otherwise, the program will wait, then proceed the moment the input channel comes on. Continue running if tool in spindle]. Subscribe to: Post Comments (Atom). View my complete profile. Josh Glenn's Photography Page.
wincnctech.blogspot.com
WinCNC Technicians Log: Making a Fully-Automatic MEASURE.ALL Command
http://wincnctech.blogspot.com/2006/03/making-fully-automatic-measureall.html
Wednesday, March 08, 2006. Making a Fully-Automatic MEASURE.ALL Command. A Measure.all macro is used with CNC Routers that have an automatic tool height measurement sensor installed on the table. It will pick up each tool the machine has in its tool rack, then measure and store the tool length offset for the tool. Here's an example measure.all macro:. T1 [GET TOOL NUMBER ONE]. L111T1 [CHECK TO SEE IF TOOL LOAD WAS SUCCESSFUL]. M98 G37Z [MEASURE TOOL (if tool succesfully loaded)]. T2 [GET TOOL NUMBER TWO].
wincnctech.blogspot.com
WinCNC Technicians Log: How can I test to see if an Auxout is activated?
http://wincnctech.blogspot.com/2006/03/how-can-i-test-to-see-if-auxout-is.html
Wednesday, March 08, 2006. How can I test to see if an Auxout is activated? M172 C20 [TEST TO SEE IF OUTPUT 20 IS ON]. G4 [This prompt will appear if the spindle is on.]. Subscribe to: Post Comments (Atom). View my complete profile. Josh Glenn's Blog on Blogger.com. Josh Glenn’s Wordpress Weblog. How can I make Wincnc wait for an Auxin Input Chan. How can I test to see if an Auxout is activated? Making a Fully-Automatic MEASURE.ALL Command. Joshua Glenn - Singer / Songwriter. Josh Glenn's Photography Page.
wincnctech.blogspot.com
WinCNC Technicians Log: March 2006
http://wincnctech.blogspot.com/2006_03_01_archive.html
Wednesday, March 08, 2006. How can I make Wincnc wait for an Auxin Input Channel to come on? When used in a gcode file, the M17 command will wait until an input comes on before it processes the next line of code. If the input channel is already turned on, the program will continue running. Otherwise, the program will wait, then proceed the moment the input channel comes on. Continue running if tool in spindle]. How can I test to see if an Auxout is activated? M172 C20 [TEST TO SEE IF OUTPUT 20 IS ON].