r2-d3.com

r5-d4.blogspot.com

red's Droids: October 2011

http://r5-d4.blogspot.com/2011_10_01_archive.html

This is my blog about building Astromech droids. Saturday, October 8, 2011. Worked on my antenna today. Today I tried to extend the range of the Vex antenna. Its really short like 12 inches long and means when I use the Vex transmitter I have to be atleast 12 feet away. Here is how I had it wired up. The vex is the yellow box with the short antenna I had wrapped around the frame. Posted by red UFO. Wednesday, October 5, 2011. Painting My Tinted Dome. This black trash can is turned out pretty cool! I need...

r5-d4.blogspot.com

red's Droids: December 2011

http://r5-d4.blogspot.com/2011_12_01_archive.html

This is my blog about building Astromech droids. Monday, December 26, 2011. Despite the lack of updates on here lately. I'm still working on droids, slow but sure. Here is a progress update. I have been collecting parts for to finish the domes. I recently got these HPs and radar eye in clear resin from Cal. I can't say enough about how awesome these parts are! Here is each HP part side by side for comparison. The old school HP is a little higher then the parts currently being run on and off. Victor's R2D...

r5-d4.blogspot.com

red's Droids: Working on R2-Q5's dome

http://r5-d4.blogspot.com/2012/05/working-on-r2-q5s-dome.html

This is my blog about building Astromech droids. Thursday, May 31, 2012. Working on R2-Q5's dome. Here is my construction of the R2-Q5 dome in styrene. What seems like an easy project has turned into quite a challenge, read on. The inner and outer domes didn't quite fit so I had to cut the inner dome in half. I used Weld On 3 first to put the spider looking ring on. Glued the bottom but it didn't hold. What worpage might look like! This is what the other side looks like. After 1 year as a parts colle...

r5-d4.blogspot.com

red's Droids: November 2011

http://r5-d4.blogspot.com/2011_11_01_archive.html

This is my blog about building Astromech droids. Sunday, November 6, 2011. Tucson Comic Con 2011. David and I went do to the Tucson Comic Con and brought a couple of droids with us. Tom and Tom jr. in costumes and R5-D4 with the first ever built Clone Wars droid built by David. I'm done doing events until I get this transmitter stuff fixed. If you look closely in this photo there is a misty shooting out of the R2 droid. It always surprises kids when the fire extinquisher is activated. Posted by red UFO.

r5-d4.blogspot.com

red's Droids: June 2011

http://r5-d4.blogspot.com/2011_06_01_archive.html

This is my blog about building Astromech droids. Sunday, June 26, 2011. CPU Armed Painted and Misc stuff. I haven't updated here in a while but I've been busy with some parts and waiting for things in the mail. I'm pretty much done painting the CPU arm and I have the servo attached! Painting the arm was much easier than I thought. Here's some of the basics so you can get an idea on how to paint yours. Power is restored back to the droid via the power board. I also installed a new Pittman motor so the...

r5-d4.blogspot.com

red's Droids: May 2011

http://r5-d4.blogspot.com/2011_05_01_archive.html

This is my blog about building Astromech droids. Monday, May 30, 2011. Phoenix Comicon Day 4 (Sunday). Only half the amount of people on Sunday than we had on Saturday. But there was still a full day of ahead of us. R2 took a trip over to the AZ Ghost Busters for a photo op. If somebody asks for photos we never turn them down. Posted by red UFO. Phoenix Comicon Day 3 (Saturday). Yesterday she was working for the Empire and today she's loading the Death Star plans into R2? I got a look into Rob's R4-G9 dr...

r5-d4.blogspot.com

red's Droids: R2-Q5 Center Foot Build

http://r5-d4.blogspot.com/2015/04/r2-q5-center-foot-build.html

This is my blog about building Astromech droids. Thursday, April 30, 2015. R2-Q5 Center Foot Build. I can't believe its been about 3 years since I did lots of updates. But here's more work I've been doing. This center foot took me about 1 month to do from start (have all the parts) to painted and completed. It don't really take that long to assemble this foot. But it was 4 years ago that I constructed my other foot. Now with center foot and ankle attached I bolted on the U channel with the 4 stand offs a...

r5-d4.blogspot.com

red's Droids: My Cylon Helmet

http://r5-d4.blogspot.com/2015/04/my-clyon-helmet.html

This is my blog about building Astromech droids. Thursday, April 30, 2015. I haven't done an update in a while but I have been working on various projects so here is an update. I ordered a Clyon Helmet from Starbuck. Here is what came in the kit. Kit came with 2 side of the helmet, mouth grill, some black resin parts for the eye area. This eye scanner I found on ebay from a guy out of Canada. It was around $50 bucks and a rapid solution to get the eye up and running. After more sanding I applyed some Gla...

r5-d4.blogspot.com

red's Droids: April 2011

http://r5-d4.blogspot.com/2011_04_01_archive.html

This is my blog about building Astromech droids. Wednesday, April 27, 2011. Today I got my tinted dome in the mail I'm experimenting for a droid I call R2-AZ. Its an 18 inch dome that's a couple of inches shorter than a 300 MM dome. So its time for a test fit. I have 3 blacklights inside it so I can later paint or light up some of them for the 'brains' or PSI lights. My black droid will have several different domes that I can swap out to make the droid change day to day. Posted by red UFO. Its just like ...