be2works.com
Several batteries
http://be2works.com/Howitworks/Severalbatteries.aspx
Working with several batteries on one PC. Having several adapters you can work with several batteries at the same time. Just connect them to PC and run BE2Works. You will see the list of adapter and can choose what adapter to assign to current copy of the software. Then click the software icon again and assign another adapter to another copy of the software. And so on. Number of adapter and the software copies is unlimited.
be2works.com
BE2Works > How it works > Analyzer
http://be2works.com/Howitworks/Analyzer.aspx
Fully charge the battery using external adjustable power source. While charging limit the current with 1.5A and the voltage with number of cells in series * 4.2V. To check impedance and capacity use external load. Connect the battery to adapter. Try to read it. If you can read the battery then enter termination voltage value. This value is used to stop discharge automatically using pin 1 of GPIO adapter and electronic switch. Press button to start.
be2works.com
BE2Works > How it works > SMBus
http://be2works.com/Howitworks/SMBus.aspx
This feature allows to send commands over battery SMBus. Type the command or open .SMB file then press CTRL ENTER to execute. You can enter any number of commands each after another. Each command on separate line. Syntax is very simple. The commands have the following format:. Where: aa - address, f - output format (optional). Valid output formats for this command: d - date, i - integer, b - binary and hex if empty. Where: aa - address, dddd - data to write. Where: aa - address, dddd - data to write.
be2works.com
BE2Works > How it works
http://be2works.com/Howitworks.aspx
Reading and saving Battery data and internal EEPROM chips. Connect SCL, SDA and GND pins of adapter to battery terminals. Press READ button to read the Battery data. LEDs “A” and “B” must change to green and you will see the data in Battery Data window. Then you can press SAVE button to save data in TXT format. Battery must be placed in normal mode. To place battery in normal mode momentary apply the voltage about 10V to its terminals. Reading and writing external EEPROM chips:. Choose chip in Chip menu.
be2works.com
BE2Works > Download
http://be2works.com/Download.aspx
Full version: 4.33 (Bohol). Demo version: 4.21 (Bohol). Drivers for EV2300 adapter. Installing Battery EEPROM Works:. 1 Double-click the Battery EEPROM Works installer icon. 2 Follow the on-screen instructions. The following hardware and software is required to run Battery EEPROM Works. An Intel Pentium processor or equivalent, 100 MHz or faster. Windows 2000, Windows XP,Windows Vista, Windows 7 , Windows 8 (32 bit or 64 bit). At least 64 MB of available random-access memory (RAM). USB to SMBus adapter.
be2works.com
BE2Works > Hardware
http://be2works.com/Hardware.aspx
Current version supports USB to GPIO and EV2300/EV2400 adpaters designed by Texas Instruments. EV2300/EV2400 limitation: external EEPROM chips are not supported. USB to GPIO adapter. EV2300 or EV2400 adapter. This adapter is most preferable. Supports all the features of BE2Works but better to use under WinXP SP3. This adapter has several limitations. You can't read and write external EEPROM chips. Doesn't have feature to control Battery analyzer. You can buy it at SiLabs. Just for $29 or here.
be2works.com
BE2Works > Buy now!
http://be2works.com/Buynow.aspx
Full version 4.33 (Bohol). Full version with no limitations. All 4.xx updates are free. HARDWARE IS NOT INCLUDED. Obsolete 2.87 LPT version (Rizal). Rizal version. 24 hours license. No support for this version. Obsolete 2.87 LPT version (Cebu). Cebu version. No time limitations. No support for this version.
be2works.com
笔记本电池维修工具
http://be2works.com/中文.aspx
Windows2000,XP,Vista,Win7,Win8. 例如:同时连接3个EV2300和3个要维修的笔记本电池,在同一个软件下,可以同时进行维修操作,节省时间,节省人工. BQ2040,BQ2060,BQ2063,BQ2092,BQ8011,BQ8012,PIC16C63A,M37515,. M37516,AS3XXD,MAX1780,NT1908,PS331. 24C01,24C02,24C04(24C046),25LC040,S29190A,S29220A(93C56),93C56,. 93C66,93C76,S29194A,S29394A,AK93C45A,AK6440A,AK6480A,M95640,BR9040. BQ2083,BQ2084,BQ20845,BQ2085,BQ8020,BQ20Z40,BQ20Z45,. BQ20Z60,BQ20Z65,BQ20Z70,BQ20Z75,BQ20Z701,BQ20Z704,BQ20Z80,. BQ20Z90,BQ20Z95,M37512,BQ8030(Sony,Sanyo),BQ20Z451(MacBook),.
be2works.com
BE2Works > Home
http://www.be2works.com/Home.aspx
To repair laptop battery you have to replace cells and to resetbattery EEPROM . Cells replacement is easy and can be made by any technician with a spot welder. But EEPROM fixing is very complicated and can be made only by person with special skills and equipment. Works under Windows 2000, XP, Vista, Win7, Win8. No Internet connection needed. (only for key activation). USB interface. No drivers needed. Reads SMBus data from laptop battery terminals. Saves SMBus data in TXT format. BQ20Z90, BQ20Z95, M37512...