samfeltonsnaredrumproject.blogspot.com
Snare Drum Project: The first stage of completion...
http://samfeltonsnaredrumproject.blogspot.com/2009/03/first-stage-of-completion.html
For my current module at university, I have to make a musical instrument! I decided to try making a snare drum so I'm going to publish my process in the form of this blog! Monday, 16 March 2009. The first stage of completion. And bolting the lugs into place, before testing the position of the lug by attaching one of the heads with tuning rods. Once happy with the position I took the head off and started the process all over again for the next lug.repeating the sequence 9 times! I'm a first year music stu...
samfeltonsnaredrumproject.blogspot.com
Snare Drum Project: First Steps!
http://samfeltonsnaredrumproject.blogspot.com/2009/03/first-steps.html
For my current module at university, I have to make a musical instrument! I decided to try making a snare drum so I'm going to publish my process in the form of this blog! Friday, 13 March 2009. Unfortunately I don't have any pictures of the first few stages but they're fairly straight forward anyway! In the picture below you can see the wood in the drum heads with the straps around. Subscribe to: Post Comments (Atom). Sam Felton: My Personal Blog. Project Music Drum Department. View my complete profile.
samfeltonsnaredrumproject.blogspot.com
Snare Drum Project: March 2009
http://samfeltonsnaredrumproject.blogspot.com/2009_03_01_archive.html
For my current module at university, I have to make a musical instrument! I decided to try making a snare drum so I'm going to publish my process in the form of this blog! Monday, 16 March 2009. The first stage of completion. And bolting the lugs into place, before testing the position of the lug by attaching one of the heads with tuning rods. Once happy with the position I took the head off and started the process all over again for the next lug.repeating the sequence 9 times! Friday, 13 March 2009.
samfeltonsnaredrumproject.blogspot.com
Snare Drum Project: A slight problem overcome :-D
http://samfeltonsnaredrumproject.blogspot.com/2009/03/slight-problem-overcome-d.html
For my current module at university, I have to make a musical instrument! I decided to try making a snare drum so I'm going to publish my process in the form of this blog! Friday, 13 March 2009. A slight problem overcome :-D. To overcome this, I had to unscrew the washer that was threaded on and turn the washer around so the sides were around the screw head rather than the thread. A long and tedious process! WellI will check.just in case.). Subscribe to: Post Comments (Atom). Sam Felton: My Personal Blog.
samfeltonsnaredrumproject.blogspot.com
Snare Drum Project: Adding fixings!
http://samfeltonsnaredrumproject.blogspot.com/2009/03/adding-fixings.html
For my current module at university, I have to make a musical instrument! I decided to try making a snare drum so I'm going to publish my process in the form of this blog! Friday, 13 March 2009. For the next step, I had to take a trip to PROJECT MUSIC in Exeter to speak to Sye about the fixings that I'd need. At this point I'd like to say a huge thanks to Sye for all his advice and help on finding the right lugs, tuning rods and other gizmos that I needed for the snare! Subscribe to: Post Comments (Atom).
samfeltonsnaredrumproject.blogspot.com
Snare Drum Project: Glueing!
http://samfeltonsnaredrumproject.blogspot.com/2009/03/glueing.html
For my current module at university, I have to make a musical instrument! I decided to try making a snare drum so I'm going to publish my process in the form of this blog! Friday, 13 March 2009. Subscribe to: Post Comments (Atom). Sam Felton: My Personal Blog. Project Music Drum Department. Project Music Drum Floor - Where I got all my parts-many thanks to Sye for his help and advice. The first stage of completion. A slight problem overcome :-D. View my complete profile.
samfeltonsnaredrumproject.blogspot.com
Snare Drum Project: Unleashing the shell!
http://samfeltonsnaredrumproject.blogspot.com/2009/03/unleashing-shell.html
For my current module at university, I have to make a musical instrument! I decided to try making a snare drum so I'm going to publish my process in the form of this blog! Friday, 13 March 2009. After leaving it glued up for a weekend, I took all the heads and straps off (harder than I thought it would be as they were glued to the drum-oops! My next major step was to sand down the bearing edges so they were even all the way round and so the drum heads sat on them nicely! Subscribe to: Post Comments (Atom).